 
Geometric Event Finding Hands-On Lesson, using TGO (IDL)
===========================================================================
 
   May 21, 2018
 
 
Overview
--------------------------------------------------------
 
   This lesson illustrates how the Geometry Finder (GF) subsystem of the
   Icy Toolkit can be used to find time intervals when specified geometric
   conditions are satisfied.
 
   In this lesson the student is asked to construct a program that finds
   the time intervals, within a specified time range, when the ExoMars-16
   Trace Gas Orbiter (TGO) is visible from ESA's deep space station in New
   Norcia. Possible occultation of the spacecraft by Mars is to be
   considered.
 
 
Note About HTML Links
--------------------------------------------------------
 
   The HTML version of this lesson contains links pointing to various HTML
   documents provided with the Toolkit. All of these links are relative
   and, in order to function, require this document to be in a certain
   location in the Toolkit HTML documentation directory tree.
 
   In order for the links to be resolved, if not done already by installing
   the lessons package under the Toolkit's ``doc/html'' directory, create a
   subdirectory called ``lessons'' under the ``doc/html'' directory of the
   ``icy/'' tree and copy this document to that subdirectory before loading
   it into a Web browser.
 
 
References
--------------------------------------------------------
 
   This section lists SPICE documents referred to in this lesson.
 
   Of these documents, the ``Tutorials'' contains the highest level
   descriptions with the least number of details while the ``Required
   Reading'' documents contain much more detailed specifications. The most
   complete specifications are provided in the ``API Documentation''.
 
   In some cases the lesson explanations also refer to the information
   provided in the meta-data area of the kernels used in the lesson
   examples. It is especially true in case of the FK and IK files, which
   often contain comprehensive descriptions of the frames, instrument FOVs,
   etc. Since both FK and IK are text kernels, the information provided in
   them can be viewed using any text editor, while the meta information
   provided in binary kernels -- SPKs and CKs -- can be viewed using
   ``commnt'' or ``spacit'' utility programs located in ``icy/exe'' of
   Toolkit installation tree.
 
 
Tutorials
 
   The following SPICE tutorials serve as references for the discussions in
   this lesson:
 
 
      Name              Lesson steps/routines it describes
      ----------------  -----------------------------------------------
      Time              Time Conversion
      SCLK and LSK      Time Conversion
      SPK               Obtaining Ephemeris Data
      Frames            Reference Frames
      Using Frames      Reference Frames
      PCK               Planetary Constants Data
      Lunar-Earth PCK   Lunar and Earth Orientation Data
      GF                The SPICE Geometry Finder (GF) subsystem
      DSK               Detailed Target Shape (Topography) Data
 
   These tutorials are available from the NAIF ftp server at JPL:
 
      http://naif.jpl.nasa.gov/naif/tutorials.html
 
 
Required Readings
 
   The Required Reading documents are provided with the Toolkit and are
   located under the ``icy/doc'' directory in the Icy installation tree.
 
      Name             Lesson steps/routines that it describes
      ---------------  -----------------------------------------
      frames.req       Using reference frames
      gf.req           The SPICE geometry finder (GF) subsystem
      kernel.req       Loading SPICE kernels
      naif_ids.req     Body and reference frame names
      pck.req          Obtaining planetary constants data
      spk.req          Computing positions and velocities
      time.req         UTC to ET time conversion
      windows.req      The SPICE window data type
      icy.req          The Icy API
 
 
The Permuted Index
 
   Another useful document distributed with the Toolkit is the permuted
   index. This is located under the ``icy/doc'' directory in the IDL
   installation tree.
 
   This text document provides a simple mechanism by which users can
   discover which Icy procedures perform functions of interest, as well as
   the names of the source files that contain these procedures.
 
 
 
Icy API Documentation
 
   An Icy routine's specification is found in the HTML API documentation
   page located under ``icy/doc/html/icy''.
 
   For example, the document
 
      icy/doc/html/icy/cspice_str2et.html
 
   describes the cspice_str2et routine.
 
 
Kernels Used
--------------------------------------------------------
 
   The following kernels are used in examples provided in this lesson:
 
      1.  Solar System Ephemeris SPK, subsetted to cover only the time
          range of interest:
 
             de430.bsp
 
      2.  Martian Satellite Ephemeris SPK, subsetted to cover only the time
          range of interest:
 
             mar085.bsp
 
      3.  ESA stations SPK:
 
             estrack_v01.bsp
 
      4.  ESA stations frame definitions:
 
             estrack_v01.tf
 
      5.  EARTH_FIXED/ITRF93 frame connection:
 
             earthfixeditrf93.tf
 
      6.  Binary PCK for Earth:
 
             earth_070425_370426_predict.bpc
 
      7.  ExoMars-16 TGO Spacecraft Trajectory SPK, subsetted to cover only
          the time range of interest:
 
             em16_tgo_mlt_20171205_20230115_v01.bsp
 
      8.  Generic LSK:
 
             naif0012.tls
 
      9.  Generic PCK:
 
             pck00010.tpc
 
      10. Low-resolution Mars DSK:
 
             mars_lowres.bds
 
 
   These SPICE kernels are included in the lesson package available from
   the NAIF server at JPL:
 
      ftp://naif.jpl.nasa.gov/pub/naif/toolkit_docs/Lessons/
 
 
Icy Modules Used
--------------------------------------------------------
 
   This section provides a complete list of the procedures and kernels that
   are suggested for usage in each of the exercises in this lesson. (You
   may wish to not look at this list unless/until you ``get stuck'' while
   working on your own.)
 
      CHAPTER EXERCISE   FUNCTIONS      NON-VOID       KERNELS
      ------- ---------  -------------  -------------  ----------
         1    viewpr     cspice_furnsh  cspice_rpd     1-9
                         cspice_str2et  cspice_celld
                         cspice_timout  cspice_wncard
                         cspice_wninsd
                         cspice_gfposc
                         cspice_wnfetd
                         cspice_kclear
 
         2    visibl     cspice_furnsh  cspice_rpd     1-10
                         cspice_str2et  cspice_celld
                         cspice_timout  cspice_wncard
                         cspice_wninsd
                         cspice_gfposc
                         cspice_gfoclt
                         cspice_wndifd
                         cspice_wnfetd
                         cspice_unload
 
              extra (*)  cspice_gfdist                 1-2,7-9
 
 
         (*) Additional APIs and kernels used in Extra Credit tasks.
 
   Refer to the Icy HTML API documentation pages located under
   ``icy/doc/html/icy'' for detailed interface specifications of these
   procedures.
 
 
Find View Periods
===========================================================================
 
 
Task Statement
--------------------------------------------------------
 
   Write a program that finds the set of time intervals, within the time
   range
 
      2018 JUN 10 TDB
      2018 JUN 14 TDB
 
   when the ExoMars-16 Trace Gas Orbiter (TGO) is visible from ESA's New
   Norcia station. These time intervals are frequently called ``view
   periods.''
 
   The spacecraft is considered visible if its apparent position (that is,
   its position corrected for light time and stellar aberration) has
   elevation of at least 6 degrees in the topocentric reference frame
   NEW_NORCIA_TOPO. In this exercise, we ignore the possibility of
   occultation of the spacecraft by Mars.
 
   Use a search step size that ensures that no view periods of duration 5
   minutes or longer will be missed by the search.
 
   Display the start and stop times of these intervals using TDB calendar
   dates and millisecond precision.
 
 
Learning Goals
--------------------------------------------------------
 
   Exposure to SPICE GF event finding routines. Familiarity with SPICE
   windows and routines that manipulate them. Exposure to SPICE time
   parsing and output formatting routines.
 
 
Approach
--------------------------------------------------------
 
 
Solution steps
 
   A possible solution could consist of the following steps:
 
   Preparation:
 
       1.   Decide what SPICE kernels are necessary. Use the SPICE summary
            tool BRIEF to examine the coverage of the binary kernels and
            verify the availability of required data.
 
       2.   Create a meta-kernel listing the SPICE kernels to be loaded.
            (Hint: consult a programming example tutorial, or the
            Introduction to Kernels tutorial, for a reminder of how to do
            this.)
 
            Name the meta-kernel 'viewpr.tm'.
 
   Next, write a program that performs the following steps:
 
       1.   Use cspice_furnsh to load the meta-kernel.
 
       2.   Create confinement and output Icy windows using cspice_celld.
 
       3.   Insert the given time bounds into the confinement window using
            cspice_wninsd.
 
       4.   Select a step size for searching for visibility state
            transitions: in this case, each target rise or set event is a
            state transition.
 
            The step size must be large enough so the search proceeds with
            reasonable speed, but small enough so that no visibility
            transition events---that is, target rise or set events---are
            missed.
 
       5.   Use the GF routine cspice_gfposc to find the window of times,
            within the confinement window, during which the ExoMars-16 TGO
            spacecraft is above the elevation limit as seen from ESA's New
            Norcia station, in the reference frame NEW_NORCIA_TOPO.
 
            Use light time and stellar aberration corrections for the
            apparent position of the spacecraft as seen from the station.
 
       6.   Fetch and display the contents of the result window. Use
            cspice_wnfetd to extract from the result window the start and
            stop times of each time interval. Display each of the intervals
            in the result window as a pair of start and stop times. Express
            each time as a TDB calendar date using the routine
            cspice_timout.
 
   You may find it useful to consult the references listed above. In
   particular, the header of the SPICE GF procedure cspice_gfposc contains
   pertinent documentation.
 
 
Solution
--------------------------------------------------------
 
 
Solution Meta-Kernel
 
   The meta-kernel we created for the solution to this exercise is named
   'viewpr.tm'. Its contents follow:
 
      KPL/MK
 
         This is the meta-kernel used in the solution of the tasks in the
         Geometric Event Finding Hands On Lesson.
 
         The names and contents of the kernels referenced by this
         meta-kernel are as follows:
 
            1.  Solar System Ephemeris SPK, subsetted to cover only the
                time range of interest:
 
                   de430.bsp
 
            2.  Martian Satellite Ephemeris SPK, subsetted to cover only
                the time range of interest:
 
                   mar085.bsp
 
            3.  ESA stations SPK:
 
                   estrack_v01.bsp
 
            4.  ESA stations frame definitions:
 
                   estrack_v01.tf
 
            5.  EARTH_FIXED/ITRF93 frame connection:
 
                   earthfixeditrf93.tf
 
            6.  Binary PCK for Earth:
 
                   earth_070425_370426_predict.bpc
 
            7.  ExoMars-16 TGO Spacecraft Trajectory SPK, subsetted to
                cover only the time range of interest:
 
                   em16_tgo_mlt_20171205_20230115_v01.bsp
 
            8.  Generic LSK:
 
                   naif0012.tls
 
            9.  Generic PCK:
 
                  pck00010.tpc
 
 
      \begindata
 
         KERNELS_TO_LOAD = (
 
            'kernels/spk/de430.bsp'
            'kernels/spk/mar085.bsp',
            'kernels/spk/estrack_v01.bsp'
            'kernels/fk/estrack_v01.tf'
            'kernels/fk/earthfixeditrf93.tf'
            'kernels/pck/earth_070425_370426_predict.bpc'
            'kernels/lsk/naif0012.tls'
            'kernels/spk/em16_tgo_mlt_20171205_20230115_v01.bsp'
            'kernels/pck/pck00010.tpc'
 
                           )
 
      \begintext
 
 
 
Solution Code
 
   The example program below shows one possible solution.
 
      PRO viewpr
 
         ;; Find and display the window of times when the ExoMars-16
         ;; TGO spacecraft is above a specified elevation limit in the
         ;; topocentric reference frame of ESA's New Norcia station.
 
         ;;
         ;; The meta-kernel:
         ;;
         META   = 'viewpr.tm'
 
         ;;
         ;; Maximum number of intervals in any window:
         ;;
         MAXIVL = 1000
 
         ;;
         ;; Time string length:
         ;;
         TIMLEN = 50
 
         ;;
         ;; Format string for time output:
         ;;
         TDBFMT = 'YYYY MON DD HR:MN:SC.### (TDB) ::TDB'
 
         ;;
         ;; Load the meta-kernel.
         ;;
         cspice_furnsh, META
 
         ;;
         ;; Assign the inputs for our search.
         ;;
         ;; Since we're interested in the apparent location of the
         ;; target, we use light time and stellar aberration
         ;; corrections. We use the "converged Newtonian" form
         ;; of the light time correction because this choice may
         ;; increase the accuracy of the occultation times we'll
         ;; compute using cspice_gfoclt.
         ;;
         srfpt  = 'NEW_NORCIA'
         obsfrm = 'NEW_NORCIA_TOPO'
         target = 'TGO'
         abcorr = 'CN+S'
         start  = '2018 JUN 10 TDB'
         stop   = '2018 JUN 14 TDB'
         elvlim =  6.0d
 
         ;;
         ;; The elevation limit above has units of degrees; we convert
         ;; this value to radians for computation using SPICE routines.
         ;; We'll store the equivalent value in radians in REVLIM.
         ;;
         revlim = cspice_rpd() * elvlim
 
         ;;
         ;; Since SPICE doesn't directly support the AZ/EL coordinate
         ;; system, we use the equivalent constraint
         ;;
         ;;    latitude > REVLIM
         ;;
         ;; in the latitudinal coordinate system, where the reference
         ;; frame is topocentric and is centered at the viewing location.
         ;;
         crdsys = 'LATITUDINAL'
         coord  = 'LATITUDE'
         relate = '>'
 
         ;;
         ;; The adjustment value only applies to absolute extrema
         ;; searches; simply give it an initial value of zero
         ;; for this inequality search.
         ;;
         adjust = 0.0d
 
         ;;
         ;; STEPSZ is the step size, measured in seconds, used to search
         ;; for times bracketing a state transition. Since we don't expect
         ;; any events of interest to be shorter than five minutes, and
         ;; since the separation between events is well over 5 minutes,
         ;; we'll use this value as our step size. Units are seconds.
         ;;
         stepsz = 300.0d
 
         ;;
         ;; Display a banner for the output report:
         ;;
 
         print, ' '
         print, 'Inputs for target visibility search:'
         print, ' '
 
         print, '   Target                       = '  + target
         print, '   Observation surface location = '  + srfpt
         print, '   Observer''s reference frame   = ' + obsfrm
         print, FORMAT = '(A,F8.6)', $
                '   Elevation limit (degrees)    = ',   elvlim
         print, '   Aberration correction        = '  + abcorr
         print, FORMAT = '(A,F10.6)', $
                '   Step size (seconds)          = ',   stepsz
 
         ;;
         ;; Convert the start and stop times to ET.
         ;;
         cspice_str2et, start, etbeg
         cspice_str2et, stop,  etend
 
         ;;
         ;; Display the search interval start time and stop
         ;; times using the format shown below.
         ;;
         ;;     2004 MAY 06 20:15:00.000 (TDB)
         ;;
         cspice_timout, etbeg, TDBFMT, TIMLEN, timstr0
         cspice_timout, etend, TDBFMT, TIMLEN, timstr1
 
         print, '   Start time                   = ' + timstr0
         print, '   Stop time                    = ' + timstr1
         print, ' '
 
         ;;
         ;; Create the "confinement" window; store in this window
         ;; the interval over which we'll conduct the search.
         ;;
         cnfine = cspice_celld( 2 )
 
         cspice_wninsd, etbeg, etend, cnfine
 
         ;;
         ;; Create an empty search result window that can hold MAXIVL
         ;; intervals.
         ;;
         riswin = cspice_celld( MAXIVL )
 
         ;;
         ;; In the call below, the maximum number of window
         ;; intervals cspice_gfposc can store internally is
         ;; set to MAXIVL.
         ;;
         ;; Now search for the time period, within our confinement
         ;; window, during which the apparent target has elevation
         ;; at least equal to the elevation limit.
         ;;
         cspice_gfposc, target, obsfrm, abcorr, srfpt,  $
                        crdsys, coord,  relate, revlim, $
                        adjust, stepsz, MAXIVL, cnfine, riswin
 
         ;;
         ;; The function cspice_wncard returns the number of intervals
         ;; in a SPICE window.
         ;;
         winsiz = cspice_wncard( riswin )
 
         ;;
         ;; Display the rise and set times.
         ;;
 
         if  winsiz EQ 0 then begin
 
            print, 'No events were found.'
 
         endif else begin
 
            ;;
            ;;  Display the visibility time periods.
            ;;
 
            print, 'Visibility times of ' + TARGET + $
                   ' as seen from ' + SRFPT + ':'
            print, ' '
 
 
            for i = 0,  winsiz-1  do begin
 
               ;;
               ;; Fetch the Ith interval from the window.
               ;;
               cspice_wnfetd, riswin, i, intbeg, intend
 
               ;;
               ;; Convert the rise time to a TDB calendar string.
               ;;
               cspice_timout, intbeg, TDBFMT, TIMLEN, timstr
 
               ;;
               ;; Write the string to standard output.
               ;;
               if  i EQ 0  then begin
 
                  line = 'Visibility or window start time:  '
 
               endif else begin
 
                  line = 'Visibility start time:            '
 
               endelse
 
               print, line + timstr
 
               ;;
               ;; Convert the set time to a TDB calendar string.
               ;;
               cspice_timout, intend, TDBFMT, TIMLEN, timstr
 
               ;;
               ;; Write the string to standard output.
               ;;
               if  i EQ (winsiz-1)  then begin
 
                  line = 'Visibility or window stop time:   '
 
               endif else begin
 
                  line = 'Visibility stop time:             '
 
               endelse
 
               print, line + timstr
 
               print, ' '
 
            endfor
 
         endelse
 
         ;;
         ;; Unload kernels so they are not accidentally used by another
         ;; SPICE-based program during the current IDL session.
         ;;
         cspice_kclear
 
      END
 
 
Solution Sample Output
 
   Numerical results shown for this example may differ across platforms
   since the results depend on the SPICE kernels used as input and on the
   host platform's arithmetic implementation.
 
   After compiling the program, execute it. The output is:
 
 
      Inputs for target visibility search:
 
         Target                       = TGO
         Observation surface location = NEW_NORCIA
         Observer's reference frame   = NEW_NORCIA_TOPO
         Elevation limit (degrees)    = 6.000000
         Aberration correction        = CN+S
         Step size (seconds)          = 300.000000
         Start time                   = 2018 JUN 10 00:00:00.000 (TDB)
         Stop time                    = 2018 JUN 14 00:00:00.000 (TDB)
 
      Visibility times of TGO as seen from NEW_NORCIA:
 
      Visibility or window start time:  2018 JUN 10 00:00:00.000 (TDB)
      Visibility stop time:             2018 JUN 10 02:11:17.355 (TDB)
 
      Visibility start time:            2018 JUN 10 13:19:58.777 (TDB)
      Visibility stop time:             2018 JUN 11 02:08:16.008 (TDB)
 
      Visibility start time:            2018 JUN 11 13:16:50.542 (TDB)
      Visibility stop time:             2018 JUN 12 02:05:12.548 (TDB)
 
      Visibility start time:            2018 JUN 12 13:13:38.573 (TDB)
      Visibility stop time:             2018 JUN 13 02:02:06.618 (TDB)
 
      Visibility start time:            2018 JUN 13 13:10:23.432 (TDB)
      Visibility or window stop time:   2018 JUN 14 00:00:00.000 (TDB)
 
 
 
Find Times when Target is Visible
===========================================================================
 
 
Task Statement
--------------------------------------------------------
 
   Extend the program of the previous chapter to find times when the
   ExoMars-16 TGO orbiter is:
 
       --   Above the elevation limit in the NEW_NORCIA_TOPO topocentric
            reference frame.
 
       --   and is not occulted by Mars
 
   Finding time intervals that satisfy the second condition requires a
   search for occultations of the spacecraft by Mars. Perform this search
   twice: once using an ellipsoidal shape model for Mars, and once using a
   DSK shape model.
 
   Compute the final results twice as well, using the results of both
   occultation searches.
 
   For each of the two shape model cases, store the set of time intervals
   when the spacecraft is visible in an Icy window. We'll call this the
   ``result window.''
 
   Display each of the intervals in the result window as a pair of start
   and stop times. Express each time as a TDB calendar date using the same
   format as in the previous program.
 
 
Learning Goals
--------------------------------------------------------
 
   Familiarity with the GF occultation finding routine cspice_gfoclt.
   Experience with Digital Shape Kernel (DSK) shape models. Further
   experience with the Icy window procedures.
 
 
Approach
--------------------------------------------------------
 
 
Solution steps
 
   A possible solution would consist of the following steps:
 
       1.   Use the meta-kernel from the previous chapter as the starting
            point. Add more kernels to it as needed.
 
            Name the meta-kernel 'visibl.tm'.
 
       2.   Include the code from the program of the previous chapter in a
            new source file; modify this code to create the new program.
 
       3.   Your program will need additional windows to capture the
            results of occultation searches performed using both
            ellipsoidal and DSK shape models. Additional windows will be
            needed to compute the set differences of the elevation search
            (``view period'') window and each of the occultation search
            windows. Further details are provided below.
 
            Create additional output Icy windows using cspice_celld.
 
       4.   The remaining steps can be performed twice: once using an
            ellipsoidal shape model for Mars, and once using a DSK Mars
            shape model. Alternatively, two copies of the entire solution
            program can be created: one for each shape model.
 
       5.   Search for occultations of the ExoMars-16 TGO orbiter as seen
            from New Norcia station using cspice_gfoclt. Use as the
            confinement window for this search the result window from the
            elevation search performed by cspice_gfposc.
 
            Since occultations occur when the apparent ExoMars-16 TGO
            spacecraft position is behind the apparent figure of Mars,
            light time correction must be performed for the occultation
            search. To improve accuracy of the occultation state
            determination, use ``converged Newtonian'' light time
            correction.
 
       6.   Use the Icy window subtraction routine cspice_wndifd to
            subtract the window of times when the spacecraft is occulted
            from the window of times when the spacecraft is above the
            elevation limit. The difference window is the final result.
 
       7.   Modify the code to display the contents of the difference
            window.
 
   This completes the assignment.
 
 
Solution
--------------------------------------------------------
 
 
Solution Meta-Kernel
 
   The meta-kernel we created for the solution to this exercise is named
   'visibl.tm'. Its contents follow:
 
      KPL/MK
 
         This is the meta-kernel used in the solution of the tasks in the
         Geometric Event Finding Hands On Lesson.
 
         The names and contents of the kernels referenced by this
         meta-kernel are as follows:
 
            1.  Solar System Ephemeris SPK, subsetted to cover only the
                time range of interest:
 
                   de430.bsp
 
            2.  Martian Satellite Ephemeris SPK, subsetted to cover only
                the time range of interest:
 
                   mar085.bsp
 
            3.  ESA stations SPK:
 
                   estrack_v01.bsp
 
            4.  ESA stations frame definitions:
 
                   estrack_v01.tf
 
            5.  EARTH_FIXED/ITRF93 frame connection:
 
                   earthfixeditrf93.tf
 
            6.  Binary PCK for Earth:
 
                   earth_070425_370426_predict.bpc
 
            7.  ExoMars-16 TGO Spacecraft Trajectory SPK, subsetted to
                cover only the time range of interest:
 
                   em16_tgo_mlt_20171205_20230115_v01.bsp
 
            8.  Generic LSK:
 
                   naif0012.tls
 
            9.  Generic PCK:
 
                  pck00010.tpc
 
           10. Low-resolution Mars DSK:
 
                  mars_lowres.bds
 
      \begindata
 
         KERNELS_TO_LOAD = (
 
            'kernels/spk/de430.bsp'
            'kernels/spk/mar085.bsp',
            'kernels/spk/estrack_v01.bsp'
            'kernels/fk/estrack_v01.tf'
            'kernels/fk/earthfixeditrf93.tf'
            'kernels/pck/earth_070425_370426_predict.bpc'
            'kernels/lsk/naif0012.tls'
            'kernels/spk/em16_tgo_mlt_20171205_20230115_v01.bsp'
            'kernels/pck/pck00010.tpc'
            'kernels/dsk/mars_lowres.bds'
 
                           )
 
      \begintext
 
 
 
Solution Code
 
      PRO visibl
 
         ;; Find and display the window of times when the ExoMars-16
         ;; TGO spacecraft is above a specified elevation limit in the
         ;; topocentric reference frame of ESA's New Norcia station
         ;; and is not occulted by Mars.
         ;;
         ;; The meta-kernel:
         ;;
         METAKR = 'visibl.tm'
 
         ;;
         ;; Maximum number of intervals in any window:
         ;;
         MAXIVL = 1000
 
         ;;
         ;; Time string length:
         ;;
         TIMLEN = 50
 
         ;;
         ;; Format string for time output:
         ;;
         TDBFMT = 'YYYY MON DD HR:MN:SC.### TDB ::TDB'
 
         ;;
         ;; Load the meta-kernel.
         ;;
         cspice_furnsh, METAKR
 
         ;;
         ;; Assign the inputs for our search.
         ;;
         ;; Since we're interested in the apparent location of the
         ;; target, we use light time and stellar aberration
         ;; corrections. We use the "converged Newtonian" form
         ;; of the light time correction because this choice may
         ;; increase the accuracy of the occultation times we'll
         ;; compute using cspice_gfoclt.
         ;;
         srfpt  = 'NEW_NORCIA'
         obsfrm = 'NEW_NORCIA_TOPO'
         target = 'TGO'
         abcorr = 'CN+S'
         start  = '2018 JUN 10 TDB'
         stop   = '2018 JUN 14 TDB'
         elvlim =  6.0d
 
         ;;
         ;; The elevation limit above has units of degrees; we convert
         ;; this value to radians for computation using SPICE routines.
         ;; We'll store the equivalent value in radians in REVLIM.
         ;;
         revlim = cspice_rpd() * elvlim
 
         ;;
         ;; We model the target shape as a point. We either model the
         ;; blocking body's shape as an ellipsoid, or we represent
         ;; its shape using actual topographic data. No body-fixed
         ;; reference frame is required for the target since its
         ;; orientation is not used.
         ;;
         back   = target
         bshape = 'POINT'
         bframe = ' '
         front  = 'MARS'
         fshape = 'ELLIPSOID'
         fframe = 'IAU_MARS'
 
         ;;
         ;; The occultation type should be set to 'ANY' for a point
         ;; target.
         ;;
         occtyp = 'any'
 
         ;;
         ;; Since SPICE doesn't directly support the AZ/EL coordinate
         ;; system, we use the equivalent constraint
         ;;
         ;;    latitude > REVLIM
         ;;
         ;; in the latitudinal coordinate system, where the reference
         ;; frame is topocentric and is centered at the viewing location.
         ;;
         crdsys = 'LATITUDINAL'
         coord  = 'LATITUDE'
         relate = '>'
 
         ;;
         ;; The adjustment value only applies to absolute extrema
         ;; searches; simply give it an initial value of zero
         ;; for this inequality search.
         ;;
         adjust = 0.0d
 
         ;;
         ;; STEPSZ is the step size, measured in seconds, used to search
         ;; for times bracketing a state transition. Since we don't expect
         ;; any events of interest to be shorter than five minutes, and
         ;; since the separation between events is well over 5 minutes,
         ;; we'll use this value as our step size. Units are seconds.
         ;;
         stepsz = 300.0d
 
         ;;
         ;; Display a banner for the output report:
         ;;
 
         print, ' '
         print, 'Inputs for target visibility search:'
         print, ' '
 
         print, '   Target                       = '  + target
         print, '   Observation surface location = '  + srfpt
         print, '   Observer''s reference frame   = ' + obsfrm
         print, '   Blocking body                = '  + front
         print, '   Blocker''s reference frame    = ' + fframe
         print, FORMAT = '(A,F8.6)', $
                '   Elevation limit (degrees)    = ',   elvlim
         print, '   Aberration correction        = '  + abcorr
         print, FORMAT = '(A,F10.6)', $
                '   Step size (seconds)          = ',   stepsz
 
         ;;
         ;; Convert the start and stop times to ET.
         ;;
         cspice_str2et, start, etbeg
         cspice_str2et, stop,  etend
 
         ;;
         ;; Display the search interval start time and stop
         ;; times using the format shown below.
         ;;
         ;;     2004 MAY 06 20:15:00.000 TDB
         ;;
         cspice_timout, etbeg, TDBFMT, TIMLEN, timstr0
         cspice_timout, etend, TDBFMT, TIMLEN, timstr1
 
         print, '   Start time                   = ' + timstr0
         print, '   Stop time                    = ' + timstr1
         print, ' '
 
         ;;
         ;; Create the "confinement" window; store in this window
         ;; the interval over which we'll conduct the search.
         ;;
         cnfine = cspice_celld( 2 )
 
         cspice_wninsd, etbeg, etend, cnfine
 
         ;;
         ;; Create an empty search result window that can hold MAXIVL
         ;; intervals.
         ;;
         riswin = cspice_celld( MAXIVL )
 
         ;;
         ;; In the call below, the maximum number of window
         ;; intervals cspice_gfposc can store internally is
         ;; set to MAXIVL.
         ;;
         ;; Now search for the time period, within our confinement
         ;; window, during which the apparent target has elevation
         ;; at least equal to the elevation limit.
         ;;
         cspice_gfposc, target, obsfrm, abcorr, srfpt,  $
                        crdsys, coord,  relate, revlim, $
                        adjust, stepsz, MAXIVL, cnfine, riswin
 
         ;;
         ;; Now find the times when the apparent target is above
         ;; the elevation limit and is not occulted by the
         ;; blocking body (Mars). We'll find the window of times when
         ;; the target is above the elevation limit and *is* occulted,
         ;; then subtract that window from the view period window
         ;; riswin found above.
         ;;
         ;; For this occultation search, we can use riswin as
         ;; the confinement window because we're not interested in
         ;; occultations that occur when the target is below the
         ;; elevation limit.
         ;;
         ;; Find occultations within the view period window.
         ;;
         print, ' Searching using ellipsoid target shape model...'
 
         fshape = 'ELLIPSOID'
 
         eocwin = cspice_celld( MAXIVL )
 
         cspice_gfoclt, occtyp, front,  fshape,  fframe, $
                        back,   bshape, bframe,  abcorr, $
                        srfpt,  stepsz, riswin,  eocwin
 
         print, ' Done.'
 
         ;;
         ;; Subtract the occultation window from the view period
         ;; window: this yields the time periods when the target
         ;; is visible.
         ;;
         evswin = cspice_celld( MAXIVL )
 
         cspice_wndifd, riswin, eocwin, evswin
 
         ;;
         ;; Repeat the search using low-resolution DSK data
         ;; for the front body.
         ;;
         print, ' Searching using DSK target shape model...'
 
         fshape = 'DSK/UNPRIORITIZED'
 
         docwin = cspice_celld( MAXIVL )
 
         cspice_gfoclt, occtyp, front,  fshape,  fframe, $
                        back,   bshape, bframe,  abcorr, $
                        srfpt,  stepsz, riswin,  docwin
 
         print, ' Done.'
         print, ' '
 
         dvswin = cspice_celld( MAXIVL )
 
         cspice_wndifd, riswin, docwin, dvswin
 
         ;;
         ;; The function cspice_wncard returns the number of intervals
         ;; in a SPICE window.
         ;;
         winsiz = cspice_wncard( evswin )
 
         ;;
         ;; Display the rise and set times.
         ;;
 
         if  winsiz EQ 0 then begin
 
            print, 'No events were found.'
 
         endif else begin
 
            ;;
            ;;  Display the visibility time periods.
            ;;
 
            print, 'Visibility start and stop times of ' $
                   + TARGET + ' as seen from ' + SRFPT
            print, 'using both ellipsoidal and DSK ' +   $
                   'target shape models:'
            print, ' '
 
            for i = 0,  winsiz-1  do begin
               ;;
               ;; Fetch the start and stop times of the Ith
               ;; interval from the ellipsoid search result
               ;; window evswin.
               ;;
               cspice_wnfetd, evswin, i, intbeg, intend
 
               ;;
               ;; Convert the start and stop times to TDB calendar
               ;; strings. Write the results.
               ;;
               cspice_timout, intbeg, TDBFMT, TIMLEN, btmstr
               cspice_timout, intend, TDBFMT, TIMLEN, etmstr
 
               print, ' Ell: ' + BTMSTR + ' : ' + ETMSTR
 
               ;;
               ;; Fetch the start and stop times of the Ith
               ;; interval from the DSK search result
               ;; window dvswin.
               ;;
               cspice_wnfetd, dvswin, i, dintbg, dinten
 
               ;;
               ;; Convert the start and stop times to TDB calendar
               ;; strings. Write the results.
               ;;
               cspice_timout, dintbg, TDBFMT, TIMLEN, btmstr
               cspice_timout, dinten, TDBFMT, TIMLEN, etmstr
 
               print, ' DSK: ' + BTMSTR + ' : ' + ETMSTR
               print, ' '
 
            endfor
 
         endelse
 
         ;;
         ;; Unload kernels so they're not accidentally used by another
         ;; SPICE-based program during the current IDL session.
         ;;
         cspice_unload, METAKR
 
      END
 
 
Solution Sample Output
 
   Numerical results shown for this example may differ across platforms
   since the results depend on the SPICE kernels used as input and on the
   host platform's arithmetic implementation.
 
   After compiling the program, execute it. The output is:
 
 
      Inputs for target visibility search:
 
         Target                       = TGO
         Observation surface location = NEW_NORCIA
         Observer's reference frame   = NEW_NORCIA_TOPO
         Blocking body                = MARS
         Blocker's reference frame    = IAU_MARS
         Elevation limit (degrees)    = 6.000000
         Aberration correction        = CN+S
         Step size (seconds)          = 300.000000
         Start time                   = 2018 JUN 10 00:00:00.000 TDB
         Stop time                    = 2018 JUN 14 00:00:00.000 TDB
 
       Searching using ellipsoid target shape model...
       Done.
       Searching using DSK target shape model...
       Done.
 
      Visibility start and stop times of TGO as seen from NEW_NORCIA
      using both ellipsoidal and DSK target shape models:
 
       Ell: 2018 JUN 10 00:00:00.000 TDB : 2018 JUN 10 01:00:30.640 TDB
       DSK: 2018 JUN 10 00:00:00.000 TDB : 2018 JUN 10 01:00:28.220 TDB
 
       Ell: 2018 JUN 10 01:41:03.610 TDB : 2018 JUN 10 02:11:17.355 TDB
       DSK: 2018 JUN 10 01:41:01.630 TDB : 2018 JUN 10 02:11:17.355 TDB
 
       Ell: 2018 JUN 10 13:28:28.785 TDB : 2018 JUN 10 14:45:38.197 TDB
       DSK: 2018 JUN 10 13:28:26.205 TDB : 2018 JUN 10 14:45:35.493 TDB
 
       Ell: 2018 JUN 10 15:26:21.981 TDB : 2018 JUN 10 16:43:32.192 TDB
       DSK: 2018 JUN 10 15:26:19.598 TDB : 2018 JUN 10 16:43:28.927 TDB
 
       Ell: 2018 JUN 10 17:24:17.290 TDB : 2018 JUN 10 18:41:27.535 TDB
       DSK: 2018 JUN 10 17:24:15.690 TDB : 2018 JUN 10 18:41:24.797 TDB
 
       Ell: 2018 JUN 10 19:22:13.628 TDB : 2018 JUN 10 20:39:21.785 TDB
       DSK: 2018 JUN 10 19:22:12.222 TDB : 2018 JUN 10 20:39:19.310 TDB
 
       Ell: 2018 JUN 10 21:20:08.856 TDB : 2018 JUN 10 22:37:12.445 TDB
       DSK: 2018 JUN 10 21:20:07.160 TDB : 2018 JUN 10 22:37:09.488 TDB
 
       Ell: 2018 JUN 10 23:18:00.834 TDB : 2018 JUN 11 00:35:01.034 TDB
       DSK: 2018 JUN 10 23:17:58.772 TDB : 2018 JUN 11 00:34:58.698 TDB
 
       Ell: 2018 JUN 11 01:15:50.883 TDB : 2018 JUN 11 02:08:16.008 TDB
       DSK: 2018 JUN 11 01:15:48.915 TDB : 2018 JUN 11 02:08:16.008 TDB
 
       Ell: 2018 JUN 11 13:16:50.542 TDB : 2018 JUN 11 14:20:09.789 TDB
       DSK: 2018 JUN 11 13:16:50.542 TDB : 2018 JUN 11 14:20:07.002 TDB
 
       Ell: 2018 JUN 11 15:01:08.370 TDB : 2018 JUN 11 16:18:03.385 TDB
       DSK: 2018 JUN 11 15:01:05.872 TDB : 2018 JUN 11 16:18:00.245 TDB
 
       Ell: 2018 JUN 11 16:59:03.014 TDB : 2018 JUN 11 18:15:58.739 TDB
       DSK: 2018 JUN 11 16:59:00.798 TDB : 2018 JUN 11 18:15:55.713 TDB
 
       Ell: 2018 JUN 11 18:56:59.199 TDB : 2018 JUN 11 20:13:54.308 TDB
       DSK: 2018 JUN 11 18:56:57.725 TDB : 2018 JUN 11 20:13:51.980 TDB
 
       Ell: 2018 JUN 11 20:54:55.301 TDB : 2018 JUN 11 22:11:47.045 TDB
       DSK: 2018 JUN 11 20:54:53.724 TDB : 2018 JUN 11 22:11:44.029 TDB
 
       Ell: 2018 JUN 11 22:52:48.925 TDB : 2018 JUN 12 00:09:35.868 TDB
       DSK: 2018 JUN 11 22:52:47.004 TDB : 2018 JUN 12 00:09:33.513 TDB
 
       Ell: 2018 JUN 12 00:50:39.046 TDB : 2018 JUN 12 02:05:12.548 TDB
       DSK: 2018 JUN 12 00:50:37.040 TDB : 2018 JUN 12 02:05:12.548 TDB
 
       Ell: 2018 JUN 12 13:13:38.573 TDB : 2018 JUN 12 13:54:43.524 TDB
       DSK: 2018 JUN 12 13:13:38.573 TDB : 2018 JUN 12 13:54:41.265 TDB
 
       Ell: 2018 JUN 12 14:35:54.054 TDB : 2018 JUN 12 15:52:36.256 TDB
       DSK: 2018 JUN 12 14:35:51.624 TDB : 2018 JUN 12 15:52:34.091 TDB
 
       Ell: 2018 JUN 12 16:33:47.502 TDB : 2018 JUN 12 17:50:30.988 TDB
       DSK: 2018 JUN 12 16:33:45.089 TDB : 2018 JUN 12 17:50:29.020 TDB
 
       Ell: 2018 JUN 12 18:31:42.896 TDB : 2018 JUN 12 19:48:26.827 TDB
       DSK: 2018 JUN 12 18:31:41.085 TDB : 2018 JUN 12 19:48:23.878 TDB
 
       Ell: 2018 JUN 12 20:29:39.039 TDB : 2018 JUN 12 21:46:20.933 TDB
       DSK: 2018 JUN 12 20:29:37.575 TDB : 2018 JUN 12 21:46:18.430 TDB
 
       Ell: 2018 JUN 12 22:27:33.596 TDB : 2018 JUN 12 23:44:11.473 TDB
       DSK: 2018 JUN 12 22:27:31.895 TDB : 2018 JUN 12 23:44:08.681 TDB
 
       Ell: 2018 JUN 13 00:25:24.992 TDB : 2018 JUN 13 01:42:00.777 TDB
       DSK: 2018 JUN 13 00:25:22.950 TDB : 2018 JUN 13 01:41:58.417 TDB
 
       Ell: 2018 JUN 13 13:10:23.432 TDB : 2018 JUN 13 13:29:19.789 TDB
       DSK: 2018 JUN 13 13:10:23.432 TDB : 2018 JUN 13 13:29:18.021 TDB
 
       Ell: 2018 JUN 13 14:10:38.985 TDB : 2018 JUN 13 15:27:11.882 TDB
       DSK: 2018 JUN 13 14:10:36.850 TDB : 2018 JUN 13 15:27:09.686 TDB
 
       Ell: 2018 JUN 13 16:08:31.566 TDB : 2018 JUN 13 17:25:06.068 TDB
       DSK: 2018 JUN 13 16:08:29.172 TDB : 2018 JUN 13 17:25:04.013 TDB
 
       Ell: 2018 JUN 13 18:06:26.219 TDB : 2018 JUN 13 19:23:01.820 TDB
       DSK: 2018 JUN 13 18:06:23.924 TDB : 2018 JUN 13 19:22:59.754 TDB
 
       Ell: 2018 JUN 13 20:04:22.175 TDB : 2018 JUN 13 21:20:57.296 TDB
       DSK: 2018 JUN 13 20:04:20.652 TDB : 2018 JUN 13 21:20:54.998 TDB
 
       Ell: 2018 JUN 13 22:02:17.650 TDB : 2018 JUN 13 23:18:49.624 TDB
       DSK: 2018 JUN 13 22:02:16.147 TDB : 2018 JUN 13 23:18:47.458 TDB
 
 
 
Extra Credit
===========================================================================
 
   In this ``extra credit'' section you will be presented with more complex
   tasks, aimed at improving your understanding of the geometry event
   finding subsystem and particularly the cspice_gfposc and cspice_gfdist
   procedures.
 
   These ``extra credit'' tasks are provided as task statements, and unlike
   the regular tasks, no approach or solution source code is provided. In
   the next section, you will find the numeric solutions to the questions
   asked in these tasks.
 
 
Task statements
--------------------------------------------------------
 
       1.   Write a program that finds the times, within the time range
 
            2018 JUN 10 TDB
            2018 JUN 11 TDB
 
            when the ExoMars-16 Trace Gas Orbiter (TGO) crosses Mars'
            equator. Display the results using TDB calendar dates and
            millisecond precision.
 
       2.   Write a program that finds the times, within the time range
 
            2018 JUN 10 TDB
            2018 JUN 11 TDB
 
            when the ExoMars-16 Trace Gas Orbiter (TGO) is at periapsis.
            Display the results using TDB calendar dates and millisecond
            precision.
 
       3.   Write a program that finds the times, within the time range
 
            2018 JUN 10 TDB
            2018 JUN 11 TDB
 
            when the ExoMars-16 Trace Gas Orbiter (TGO) is at apoapsis.
            Display the results using TDB calendar dates and millisecond
            precision.
 
 
Solutions
--------------------------------------------------------
 
       1.   Solution for the equator crossing search, using cspice_gfposc
            for the ExoMars-16 Trace Gas Orbiter (TGO) spacecraft latitude
            in the Mars body-fixed frame equal to 0 degrees:
 
 
      Inputs for equator crossing search:
 
         Target                       = TGO
         Observer                     = MARS
         Observer's reference frame   = IAU_MARS
         Latitude limit (degrees)     = 0.000000
         Aberration correction        = NONE
         Step size (seconds)          = 300.000000
         Start time                   = 2018 JUN 10 00:00:00.000 (TDB)
         Stop time                    = 2018 JUN 11 00:00:00.000 (TDB)
 
      TGO MARS equator crossing times:
 
       Equator crossing or start time:  2018 JUN 10 00:14:08.836 (TDB)
       Equator crossing time:           2018 JUN 10 01:12:34.582 (TDB)
       Equator crossing time:           2018 JUN 10 02:12:00.375 (TDB)
       Equator crossing time:           2018 JUN 10 03:10:28.808 (TDB)
       Equator crossing time:           2018 JUN 10 04:09:53.955 (TDB)
       Equator crossing time:           2018 JUN 10 05:08:23.919 (TDB)
       Equator crossing time:           2018 JUN 10 06:07:48.630 (TDB)
       Equator crossing time:           2018 JUN 10 07:06:17.539 (TDB)
       Equator crossing time:           2018 JUN 10 08:05:42.659 (TDB)
       Equator crossing time:           2018 JUN 10 09:04:09.120 (TDB)
       Equator crossing time:           2018 JUN 10 10:03:34.270 (TDB)
       Equator crossing time:           2018 JUN 10 11:01:59.269 (TDB)
       Equator crossing time:           2018 JUN 10 12:01:22.866 (TDB)
       Equator crossing time:           2018 JUN 10 12:59:49.352 (TDB)
       Equator crossing time:           2018 JUN 10 13:59:13.289 (TDB)
       Equator crossing time:           2018 JUN 10 14:57:41.242 (TDB)
       Equator crossing time:           2018 JUN 10 15:57:07.576 (TDB)
       Equator crossing time:           2018 JUN 10 16:55:35.266 (TDB)
       Equator crossing time:           2018 JUN 10 17:55:02.773 (TDB)
       Equator crossing time:           2018 JUN 10 18:53:30.271 (TDB)
       Equator crossing time:           2018 JUN 10 19:52:56.383 (TDB)
       Equator crossing time:           2018 JUN 10 20:51:23.966 (TDB)
       Equator crossing time:           2018 JUN 10 21:50:47.729 (TDB)
       Equator crossing time:           2018 JUN 10 22:49:14.385 (TDB)
       Equator crossing or stop time:   2018 JUN 10 23:48:37.583 (TDB)
 
       2.   Solution for the periapsis search, using cspice_gfdist for the
            ExoMars-16 Trace Gas Orbiter (TGO) spacecraft distance from
            Mars at a local minimum:
 
 
      Inputs for periapsis search:
 
         Target                       = TGO
         Observer                     = MARS
         Aberration correction        = NONE
         Step size (seconds)          = 300.000000
         Start time                   = 2018 JUN 10 00:00:00.000 (TDB)
         Stop time                    = 2018 JUN 11 00:00:00.000 (TDB)
 
      TGO periapsis times:
 
       Periapsis or start time:         2018 JUN 10 00:43:06.357 (TDB)
       Periapsis time:                  2018 JUN 10 02:40:47.168 (TDB)
       Periapsis time:                  2018 JUN 10 04:38:45.496 (TDB)
       Periapsis time:                  2018 JUN 10 06:36:32.706 (TDB)
       Periapsis time:                  2018 JUN 10 08:34:10.548 (TDB)
       Periapsis time:                  2018 JUN 10 10:31:49.108 (TDB)
       Periapsis time:                  2018 JUN 10 12:29:20.342 (TDB)
       Periapsis time:                  2018 JUN 10 14:27:07.089 (TDB)
       Periapsis time:                  2018 JUN 10 16:25:36.081 (TDB)
       Periapsis time:                  2018 JUN 10 18:24:02.653 (TDB)
       Periapsis time:                  2018 JUN 10 20:22:23.184 (TDB)
       Periapsis or end time:           2018 JUN 10 22:20:12.453 (TDB)
 
       3.   Solution for the apoapsis search, using cspice_gfdist for the
            ExoMars-16 Trace Gas Orbiter (TGO) spacecraft distance from
            Mars at a local maximum:
 
 
      Inputs for apoapsis search:
 
         Target                       = TGO
         Observer                     = MARS
         Aberration correction        = NONE
         Step size (seconds)          = 300.000000
         Start time                   = 2018 JUN 10 00:00:00.000 (TDB)
         Stop time                    = 2018 JUN 11 00:00:00.000 (TDB)
 
      TGO apoapsis times:
 
       Apoapsis or start time:          2018 JUN 10 01:41:44.632 (TDB)
       Apoapsis time:                   2018 JUN 10 03:39:31.106 (TDB)
       Apoapsis time:                   2018 JUN 10 05:37:22.115 (TDB)
       Apoapsis time:                   2018 JUN 10 07:34:59.674 (TDB)
       Apoapsis time:                   2018 JUN 10 09:32:25.708 (TDB)
       Apoapsis time:                   2018 JUN 10 11:29:47.945 (TDB)
       Apoapsis time:                   2018 JUN 10 13:27:30.200 (TDB)
       Apoapsis time:                   2018 JUN 10 15:26:02.524 (TDB)
       Apoapsis time:                   2018 JUN 10 17:24:37.842 (TDB)
       Apoapsis time:                   2018 JUN 10 19:23:11.265 (TDB)
       Apoapsis time:                   2018 JUN 10 21:21:13.530 (TDB)
       Apoapsis or stop time:           2018 JUN 10 23:18:56.796 (TDB)
 
